Custom Stairs – Why Start Looking More Completely On This Factor..

Should you be purchasing a stair with balusters in a contrasting material, like painted balusters on an oak stair, questions will probably arise with regards to the finishing of the stair. “Should my painter finish the balusters separately from the stair, then have the balusters installed once the stair is finished?

Below are a few facts to consider with Wood Railing Installers: Your painter will generally choose painting the balusters before installation. This allows them to be sprayed instead of brushed and eliminates a lot of “cut-in” work.

Painting balusters separately does mean that the stair installers will have to come back to the web page, take away the railings and install the balusters. You will have charge for this particular “second trip” towards the jobsite. You should remember to schedule this “second trip” in coordination with the finishing of the conclusion.

Leaving your balusters out for painting means that they will probably be lost or stolen during this time period. You may be responsible for balusters left at the jobsite. After the painted balusters are finally installed, you will see additional “touch-up finishing required on the rail joints. Holes will have to be filled and stain and finish re-requested the final finish.

Plan installing of your hardwood stair for after your drywall has been taped, sanded, and primed. The drywall process can damage the stair. Drywall mud and paint overspray could make the stair finishing process extremely tough and may also make desired results impossible to attain.

Most hardwoods are an open grain wood so when dirt gets a part of open grain it is very difficult to remove, even with sanding. This will have a negative effect on the appearance and texture of the finish. Care must also be taken to safeguard the stair from dirt and mud.

Never Cover Hardwood Stairs With Plastic. Plastic fails to allow airflow, trapping moisture underneath and creating the wood to expand and contract. This expansion and contraction causes the wood joints to start up and might cause the wood to crack.

The environmental conditions indoors are critical to the caliber of the stair. Hardwood lumber continues to be dried by way of a very controlled process with an industry standard moisture content of 6 – 8%. This matches the moisture content vcbxbf the typical home and allows the wood to remain stable under normal conditions.

In cold climates, whenever a home is heated to some high temperature during winter, air could become very dry, creating the wood to shrink. This shrinkage can make cracks visible inside the wood and joints can start to open up. Subjecting a stair to high levels of heat is much like putting it within an oven and will accelerate the deterioration of the stair.

All hardwoods must be sealed on every side to retard movement and protect from contact with elements and damage. It is recommended to seal wood immediately.

Comments for this post are closed.