FTTH Cable Production Line – There’s A Lot More Than You Would Think On This Page..

How well do you know fiber optic cables? If you don’t have lots of information regarding the cables here are some facts that you should know about them. Although an SZ Stranding Line is made of glass plus some of its areas require a lot of care, an entire fiber was created in a way that it’s able to withstand even the most rugged installations. For example, cat 5/5e/6/6A features a pulling tension of 25 pounds. There are many optics that are designed to withstand over 200 pounds of pulling tension.

Research studies show that a fiber optic can withstand higher pulling tension than copper. Additionally, it’s rated for larger temperature ranges and is safe from EM/RFI interference.

Fiber Is A Lot More Secure

Since information is carried within the cable, the details are less risky when compared to other cables; therefore, it’s challenging to hack the details. While it’s hard to hack the details inside the cables, it doesn’t mean that they can’t be hacked. The reason being all that you should do is to get the network tap and physical access to the cable and you will be able to hack it.

It’s Very easy to Install The Cable

Whilst the cable was challenging to install not too long ago, stuff has changed now as technologies have changed. If you want to install the cable you only have to contact installation professionals as well as the cable will be installed in a very limited time.

The Cables Aren’t Impacted By Environmental Conditions

Considering that the fibers carry light, they aren’t disturbed by alterations in temperature, cold, rain or some other environmental condition. This is not the truth with copper cables which can be usually afflicted with environmental conditions. For instance, when it’s cold, the cables transmit data faster than when it’s hot.

They Support Wireless

The cables are heavily utilized by telecommunication companies to transport wireless telephone signals from the towers towards the central network. The fibers are preferred by most companies due to their large bandwidth and long lasting compatibility with the network equipment.

Much like copper cables, NEC (National Electrical Code) requires Secondary Coating Line be marked with their fire and smoking ratings. NEC requires all indoor fiber cables be marked correctly and installed properly for its intended use. According to NEC, a building’s inside area is split into three varieties of sections: plenums, risers and general purpose areas.

A Plenum area is a building space utilized for ventilation or air distribution system. In most buildings, the area above a drop ceiling or within a raised floor can be used as the air return (source of air) for the air cooling. Those drop ceiling and raised floors are also where fiber cables are often installed. If those cables were burning, they might emit toxic fumes and also the fumes could be fed to all of those other building by the air conditioner. Because of this, people may be injured while they are quite a distance from the fire.


These are the facts you need to know about optic cables. When buying the units you should ensure that you buy them from authorized dealers. After buying them you ought to make certain you set them up professionally. If you don’t have the skills you need to hire an experienced professional to set up them for you personally. We manufacture different eygmcn of optic fiber cable equipment like Optical cable sheathing line and lots of other equipment. Check out the given links to find out much more about us.

When performing fusion splicing you may need a Fusion Splicer, fusion splice protection sleeves, and isopropyl alcohol and stripping tools. If you work with a mechanical splice, you will need stripping tools, mechanical splices, isopropyl alcohol along with a mechanical splice assembly tool. When hand terminating a fiber you will need 99% isopropyl alcohol, epoxy/adhesive, a syringe and needle, polishing (lapping) film, a polishing pad, a polishing puck, a crimp tool, stripping tools, fiber optic connectors ( or splice on connectors) and piano wire.

When a termination is finished you have to inspect the conclusion face in the connector with Secondary Coating Line. Ensuring that light is getting through either the splice or perhaps the connection, a Visual Fault Locator can be utilized. This piece of equipment will shoot a visible laser down the fiber cable to help you tell that there are no breaks or faulty splices. In the event the laser light stops along the fiber somewhere, there is most likely a break inside the glass at that point. If you have greater than a dull light showing on the connector point, the termination was not successful. The light also needs to move through the fusion splice, when it will not, stop and re- splice or re-terminate.

Comments for this post are closed.